Limit values
- Menu: 4.6.3
Description
These parameters specify limit values for the setpoints that must not be exceeded.
The following table shows which limit values are used by which FCBs:
Parameter | FCB | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
02 | 04 | 05 | 06 | 07 | 08 | 09 | 10 | 12 | 13 | 14 | 19 | 20 | 21 | 26 | |
Positive speed | – | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | – | – | – | ✔ | – | – |
Negative speed | – | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | – | – | – | ✔ | – | – |
Acceleration | – | ✔ | ✔ | – | – | – | ✔ | – | ✔ | – | – | ✔ | ✔ | – | – |
Deceleration | ✔ | ✔ | ✔ | – | – | – | ✔ | – | ✔ | ✔ | – | ✔ | ✔ | o | ✔ |
Jerk time | ✔ | ✔ | ✔ | – | ✔ | – | ✔ | – | ✔ | ✔ | ✔ | ✔ | ✔ | o | ✔ |
Torque | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | o | ✔ |
Apparent output current | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Voltage limit | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ | ✔ |
Emergency stop deceleration | – | – | – | – | – | – | – | – | – | – | ✔ | – | – | – | – |
✔ | Always active |
o | Only active if FCB 21 is activated with a rotating drive. With these parameters, the drive is stopped before FCB 21 is executed. |
– | Inactive |
INFORMATION
In the U/f control mode, the Torque limit value is not used.
