"Use ""operating mode"" control bit"

  • Menu: 4.4.9-1.4-1
  • Index: 8509.9

Description

Specifies whether the control bits are used that have been parameterized accordingly in the digital inputs or control words.

The following settings are possible:

Setting

Meaning

0 (no)

Positioning is carried out using the operating mode defined in the Operating mode parameter.

1 (yes)

Positioning starts only with the set control bit. Either bits of the digital inputs (parameter group Inputs/outputs > Basic unit/I/O card) or bits of the control words (parameter group Setpoints > Control word.) must be parameterized to FCB 09 Position control – operating mode bit. as the control bit.

The control bit is interpreted as a decimal number and corresponds to the different operating modes that can be defined in the Operating mode parameter:

  • Value 0 = operating mode Absolute
  • Value 1 = operating mode Relative
  • Value 2 = operating mode Modulo absolute – positive direction
  • Value 3 = operating mode Modulo absolute – negative direction
  • Value 4 = operating mode Modulo absolute – shortest distance
  • Value 5 = operating mode Absolute – without referencing

The operating mode defined by the control bit is applied independently of the setting in the Operating mode parameter.

DefaultSetting

0 (no)