Behavior at standstill
- Menu: 4.6.5-2.1
Description
Specifies the behavior of the drive when motor standstill is detected at the end of the deceleration ramp of a stop function.
INFORMATION
The parameter is effective in the following operating modes: VFCPLUS (with encoder), ELSM® and CFC. At standstill in the other operating modes, the output stage is always inhibited and the brake is applied or the DynaStop® function is activated.
The parameter is used in the following drive functions:
- FCB 02 Stop default
- FCB 05 Speed control with activated Stop by setpoint function
- FCB 13 Stop at application limits
- FCB 14 Emergency stop
The following settings are possible:
Setting | Meaning |
|---|---|
Drive energized (brake released/DynaStop® disabled) | The speed setpoint 0 is held when the motor is at standstill. The brake remains released or the DynaStop® function remains deactivated. |
Drive not energized (brake applied/DynaStop® activated) | When motor standstill is reached, the brake is applied and the output stage is inhibited or the DynaStop® function is activated. |
DefaultSetting
Drive not energized (brake applied/DynaStop® activated)
