Compact extra-low voltage drives

The new compact extra-low voltage drives are absolutely at home in the materials handling technology used in warehousing systems. They offer your applications high running smoothness, overload capacity and flexibility. They have a diverse range of potential uses, and they fit like a glove into even small installation spaces.

For changing requirements in logistics

Make your logistics more efficient and flexible using the new extra-low voltage drives
The new compact extra-low voltage drives.
The new compact extra-low voltage drives.

Demands in consumer and industrial logistics are changing. Orders are having to be fulfilled ever faster and container sizes are getting smaller. At the same time, factory logistics, and therefore also warehouse technology, are becoming more flexible, while conveyor modules are getting smaller and materials handling technology is increasingly mobile. Shuttle vehicles are taking over from rigid systems in certain areas – logistics and warehouse technology are changing. These changes are increasing the level of automation and decreasing the installation space for gearmotors. How much drive technology weighs plays a vital role, particularly when it comes to mobile systems. The associated drive systems must therefore also become more decentralized, more compact, more lightweight and more networked in order to efficiently meet these requirements.

We offer decentralized compact extra-low voltage drives precisely in order to meet these needs. The gearmotors consist of a compact motor with a 48 VDC voltage supply. These are compatible with compact planetary, right-angle, and right-angle planetary gear units. Together, they make up a drive solution with a compact construction for decentralized systems.

The compact motors are electronically commutated internal rotor motors with a high power density and dynamics. The motors feature fully integrated control electronics with an analog and digital interface. The parameters of these interfaces can be configured via an RS485 engineering interface. This enables users to make flexible use of the motors and adapt them to suit a variety of applications.

Engineering software DCAShell (DE / EN)

The engineering software DCAShell for compact extra-low voltage drives is necessary to set parameters and operating data and is also needed for the diagnosis of operating states.

Your drive benefits

  • Overload capacity

    thanks to a gear unit selection for high peak loads
  • Running smoothness

    thanks to optimized gear wheel geometry in a compact design
  • Customized

    thanks to a large number of motor and gear unit combinations with a variety of reduction ratios in the first and second stage
  • Flexible

    since the symmetrical mounting position and lack of offset enable a range of installation positions

Typical applications

Stationary and mobile materials handling technology
Perfect for stationary and mobile materials handling technology.
Perfect for stationary and mobile materials handling technology.

The new compact extra-low voltage drives are absolutely at home in warehouse technology and storage systems. Applications in stationary materials handling technology include roller and accumulating roller conveyors, belt and chain conveyors, lifting modules and corner transfer units, turning devices and rotary tables, trolleys, pallet transfer shuttles, vertical conveyors and hoists, stacking devices, container storage systems and sequencers, pushers, and additional stationary materials handling technology.

However, there are also applications for the new compact extra-low voltage drives in mobile materials handling technology, for example as simple shuttle travel drives and load handling devices, on operating devices (SRS, automatic small parts warehouse), in sorters with a belt or tray, pallet transfer shuttles or automated guided vehicle systems.

Your system benefits

  • More compact vehicles

    thanks to optimized and integrated drives
  • Greater flexibility

    thanks to access to an end-to-end automation system
  • System safety

    thanks to SEW‑EURODRIVE’s service availability

Properties

Compact motor of the DCA.. series
Compact motor of the DCA.. series
Compact motor of the DCA.. series

Compact motor of the DCA.. series

  • efficient as they are electronically commutated internal rotor motors with a high power density and dynamics
  • compact as the drives are equipped with fully integrated control electronics with an analog and digital interface
  • easy to handle as the parameters can be configured via an RS485 engineering interface
  • flexible as they can be adapted to various applications
  • contact reliable as all required electrical connections can be made using an hybrid plug connector
Compact right-angle gearmotor of the KN..DCA.. series
Compact right-angle gearmotor of the KN..DCA.. series
Compact right-angle gearmotor of the KN..DCA.. series

Compact right-angle gearmotor of the KN..DCA.. series

  • compact thanks to the combination of helical and planetary stage in one housing
  • high overload capacity as the planetary output stage consists of 5 straight-toothed planet gears made of hardened sintered steel
  • powerful as the right-angle stage is designed to provide optimum conditions for the engaging gears and is connected upstream to a helical planetary stage
  • a perfect fit as the drives can be used for applications with limited installation space thanks to their compact design
  • efficient as there is no self-locking effect thanks to the high level of efficiency
Compact planetary gearmotor of the PN..DCA.. series
Compact planetary gearmotor of the PN..DCA.. series
Compact planetary gearmotor of the PN..DCA.. series

Compact planetary gearmotor of the PN..DCA.. series

  • high overload capacity thanks to a gear unit selection for high peak loads
  • running smoothness thanks to optimized gear geometry in a compact design
  • a perfect fit thanks to multiple motor and gear unit combinations with a variety of reduction ratios in the first and second stage
  • flexible as there is no axis offset and the symmetrical design allows many installation positions
Compact right-angle gearmotor of the W.03..DCA series
Compact right-angle gearmotor of the W.03..DCA series
Compact right-angle gearmotor of the W.03..DCA series
Compact parallel-shaft helical gearmotor of the F.03..DCA series
Compact parallel-shaft helical gearmotor of the F.03..DCA series
Compact parallel-shaft helical gearmotor of the F.03..DCA series

Technical data

Close table
P motor Pn = 188 W
na
min-1
Ma
Nm
i FRA
N
SEW
fB
  Designation Gear unit Motor m
kg
800 2.03 5 350 19.75   PNZ 63F DCA63S 048P00/DBC00 2.15
267 5.47 15 350 12.44   PNZ 63F DCA63S 048P00/DBC00 2.75
89 16.40 45 350 3.54   PNZ 63F DCA63S 048P00/DBC00 2.75
597 2.71 6.7 250 0.73   KNZ 75F DCA63S 048P00/DBC00 1.75
197 7.40 20.3 250 1.07   KNZ 75F DCA63S 048P00/DBC00 2.15
74 17.71 54 600 1.26   KNZ 63F DCA63S 048P00/DBC00 1.85
47 27.86 84.8 600 0.80   KNZ 63F DCA63S 048P00/DBC00 1.85
We have stored a table for you here.
Close table
P motor Pn = 188 W
na
min-1
Ma
Nm
i FRA
N
SEW
fB
Designation Gear unit Motor m
kg
609 2.62 6.57 1800 7.24 W / WA 03 DCA63S 048P00/DBC00 3.10
390 3.92 10.25 1800 6.38 W / WA 03 DCA63S 048P00/DBC00 3.10
242 5.82 16.5 1800 4.30 W / WA 03 DCA63S 048P00/DBC00 3.10
145 8.30 27.5 1800 3.01 W / WA 03 DCA63S 048P00/DBC00 3.10
83 11.63 48 1800 2.15 W / WA 03 DCA63S 048P00/DBC00 3.10
621 2.52 6.44 1600 11.91 F / FA 03 DCA63S 048P00/DBC00 3.35
397 3.94 10.08 1600 7.61 F / FA 03 DCA63S 048P00/DBC00 3.35
266 5.87 15.01 1600 5.11 F / FA 03 DCA63S 048P00/DBC00 3.35
131 11.93 30.51 1600 2.51 F / FA 03 DCA63S 048P00/DBC00 3.35
84 18.69 47.79 1600 1.61 F / FA 03 DCA63S 048P00/DBC00 3.35
We have stored a table for you here.
Close table
P motor Pn = 272 W
na
min-1
Ma
Nm
i FRA
N
SEW
fB
  Designation Gear unit Motor m
kg
800 2.03 5 350 16.68   PNZ 63F DCA63M 048P00/DBC00 2.45
267 7.90 15 350 8.61   PNZ 63F DCA63M 048P00/DBC00 2.75
89 23.69 45 350 2.45   PNZ 63F DCA63M 048P00/DBC00 2.75
74 25.59 54 600 0.87   KNZ 63F DCA63M 048P00/DBC00 2.15
47 40.18 84.8 600 0.55   KNZ 63F DCA63M 048P00/DBC00 2.15
We have stored a table for you here.
Close table
P motor Pn = 272 W
na
min-1
Ma
Nm
i FRA
N
SEW
fB
Designation Gear unit Motor m
kg
609 4.63 6.57 1800 4.10 W / WA 03 DCA63M 048P00/DBC00 3.40
390 6.92 10.25 1800 3.61 W / WA 03 DCA63M 048P00/DBC00 3.40
242 10.27 16.5 1800 2.13 W / WA 03 DCA63M 048P00/DBC00 3.40
145 14.64 27.5 1800 1.71 W / WA 03 DCA63M 048P00/DBC00 3.40
83 20.52 48 1800 1.22 W / WA 03 DCA63M 048P00/DBC00 3.40
621 4.44 6.44 1600 6.75 F / FA 03 DCA63M 048P00/DBC00 3.65
397 6.96 10.08 1600 4.31 F / FA 03 DCA63M 048P00/DBC00 3.65
266 10.36 15.01 1600 2.90 F / FA 03 DCA63M 048P00/DBC00 3.65
131 21.05 30.51 1600 1.43 F / FA 03 DCA63M 048P00/DBC00 3.65
84 32.98 47.79 1600 0.91 F / FA 03 DCA63M 048P00/DBC00 3.65
We have stored a table for you here.
Close table
P motor Pn = 356 W
na
min-1
Ma
Nm
i FRA
Nm
SEW
fB
  Designation Gear unit Motor m
kg
800 3.83 5 350 10.46   PNZ 63F DCA63L 048P00/DBC00 2.8
267 10.33 15 350 6.58   PNZ 63F DCA63L 048P00/DBC00 3.4
89 30.98 45 350 1.87   PNZ 63F DCA63L 048P00/DBC00 3.4
74 33.46 54 600 0.67   KNZ 63F DCA63L 048P00/DBC00 2.5
47 52.62 84.8 600 0.42   KNZ 63F DCA63L 048P00/DBC00 2.5
We have stored a table for you here.
Close table
P motor Pn = 356 W
na
min-1
Ma
Nm
i FRA
N
SEW
fB
Designation Gear unit Motor m
kg
609 5.25 6.57 1800 3.62 W / WA 03 DCA63L 048P00/DBC00 3.75
390 7.84 10.25 1800 3.19 W / WA 03 DCA63L 048P00/DBC00 3.75
242 11.64 16.5 1800 2.15 W / WA 03 DCA63L 048P00/DBC00 3.75
145 16.60 27.5 1800 1.51 W / WA 03 DCA63L 048P00/DBC00 3.75
83 23.26 48 1800 1.07 W / WA 03 DCA63L 048P00/DBC00 3.75
621 5.04 6.44 1600 5.96 F / FA 03 DCA63L 048P00/DBC00 4.00
397 7.88 10.08 1600 3.81 F / FA 03 DCA63L 048P00/DBC00 4.00
266 11.74 15.01 1600 2.56 F / FA 03 DCA63L 048P00/DBC00 4.00
131 23.86 30.51 1600 1.26 F / FA 03 DCA63L 048P00/DBC00 4.00
84 37.37 47.79 1600 0.80 F / FA 03 DCA63L 048P00/DBC00 4.00
We have stored a table for you here.

Area of operation

Lift modules and corner transfer units

SEW image

Logistics implies more than conveying along straight routes or one level. That’s why our compact extra-low voltage drives are able to convey around corners or drive lift modules.

Belt and chain conveyors

SEW image

Our compact extra-low voltage drives are also tailored to the demands of continuous duty. No matter if packaged goods or light bulk material – our drives transport anything up to 50 kg.

Rotary units and rotary tables

SEW image

If your conveyor systems cross each other or if they need to feed goods in and out, our compact extra-low voltage drives also help you efficiently with turning devices.

Linear conveyors and accumulating roller conveyors

SEW image

These are getting ever faster and lighter. Also, flexible, controlled stopping of the packaged goods must be ensured – an optimum environment for our new compact extra-low voltage drives.

Pushers and format adjustment

SEW image

Diverse goods with different dimensions are transported on your belt? No problem! Our new compact extra-low voltage drives with high overload capacity also move pushers and format adjusters reliably.

Contact

Please enter your postal code to find the corresponding contact person.

Similar products

Service
When you need more than just a drive

When you need more than just a drive

Find your perfect all-round package here

When you need more power

When you need more power

For all drive tasks, even over 500 kNm.