MOVI-C® control technology

When you think of automation and control technology, do you automatically imagine a whole lot of complex work for commissioning and then running production operations? It doesn't have to be like that – there is certainly an easier way. Parameterizing instead of programming – tailoring motion control functionality and intelligent control technology to your needs. A solution where everything is a perfect match – automation technology, software and control technology with a systematic approach – and that at the same time leaves you all the freedom you need.

Control technology made by SEW-EURODRIVE

  • MOVI-C® CONTROLLER / control cabinet MOVI-C® CONTROLLER / control cabinet
  • MOVI-C® FIELD CONTROLLER MOVI-C® FIELD CONTROLLER / decentralized technology
  • Control technology Software: Control technology
  • Accessories and options / visualization Accessories and options / visualization

MOVI-C® CONTROLLER / control cabinet

Controllers for control cabinet installation
Controllers for control cabinet installation
Controllers for control cabinet installation

The performance class of the MOVI-C® CONTROLLERs depends on the number of inverters and the number of synchronous axes and auxiliary axes required and to be configured for the movement. The four performance classes "power", "progressive", "advanced", and "standard" are available. All versions have a compact design, meaning they can fit into even small machine control cabinets.

  • standard performance class standard performance class
  • advanced performance class advanced performance class
  • progressive performance class progressive performance class
  • power performance class power performance class

standard performance class

Close table
Properties

  • Motion controller for simple motion tasks, such as positioning or speed mode
  • Can be connected to any conventional control system
  • Simple and centralized data storage
  • PROFIsafe routing to the axis modules
  • Simple replacement function
  • FSoE safety routing
  • Web visualization


Technical data

  • Number of axes:
    • Interpolated: 2
    • Not interpolated: 8
  • CPU technology: DualCore ARM Cortex-A7, 1 GHz
  • Ethernet interface: 1
  • System bus: EtherCAT®-, SBusPLUS-master
  • Fieldbus slave: PROFINET slave, EtherNet/IPTM adapter
  • POPC UA: Server/client
  • Memory: 512 MB SD card

We have stored a table for you here.

advanced performance class

Close table
Properties

  • Motion controller for demanding motion tasks, such as synchronous axes with electronic gear unit or electronic cam
  • Can be connected to any conventional control system
  • Simple and centralized data storage
  • PROFIsafe routing to the axis modules
  • Simple replacement function
  • FSoE routing
  • Web visualization

Technical data

  • Number of axes:
    • Interpolated: 8
    • Not interpolated: 8
  • CPU technology: DualCore ARM Cortex-A7, 1 GHz
  • Ethernet interface: 2
  • System bus: EtherCAT®-, SBusPLUS-master
  • Fieldbus slave: PROFINET slave, EtherNet/IPTM adapter
  • POPC UA: Server/client
  • Memory: 512 MB SD card

We have stored a table for you here.

progressive performance class

Close table
Properties

  • Motion controller for complex motion tasks such as multi-axis control and robotics, as well as automation tasks such as visualization
  • Connection of IT (Information Technology) and OT (Operational Technology) offers the possibility of Windows-based
    applications such as visualizations under any standard control system
  • Offers the possibility of Windows-based applications such as visualizations
  • Can be connected to any standard control system
  • Simple and centralized data storage
  • PROFIsafe routing to the axis modules
  • Simple replacement function
  • Web visualization

Technical data Number of axes:

  • Interpolated: up to 16
  • Not interpolated: 16


  • CPU technology: Intel Atom® E3815 1.46 GHz, Intel Atom® E3825, 2 × 1.366 GHz, Intel Atom® E3845, 4 × 1.91 GHz
  • Ethernet interface: 3
  • System bus: EtherCAT®, SBusPLUS master
  • Fieldbus-master: PROFINET-master, EtherNet/IPTM-scanner
  • Fieldbus slave: PROFINET slave, EtherNet/IPTM adapter
  • OPC UA: Server/client
  • USB interfaces: 3
  • Monitor interfaces: 1 × display port
  • Memory: 2 GB CFast memory card
  • Optional Windows operating system: second operating system Windows 10 IoT connected by hypervisor technology

We have stored a table for you here.

power performance class

Close table
Properties

  • Controller for high-end motion control, robotics and automation tasks such as visualization
  • Offers the possibility of Windows-based
    applications such as visualizations
  • Can be connected to all standard control systems
  • Simple and centralized data storage
  • PROFIsafe routing to the axis modules
  • Simple replacement function
  • FSoE safety routing

Technical data

  • Number of axes:
    • Interpolated: 32
    • Not interpolated: 32
  • CPU technology: Intel Core2Duo 2.2 GHz
  • Ethernet interface: 3
  • System bus: EtherCAT®, SBusPLUS-master
  • Fieldbus slave: PFROFINET slave, EtherNet/IPTM adapter
  • USB interfaces: 7
  • Monitor interfaces: 1 × DVI
  • Memory: 2 GB CFast memory card
  • Optional Windows operating system: second operating system Windows 7 embedded connected by state-of-the-art hypervisor technology

We have stored a table for you here.

MOVI-C® FIELD CONTROLLER

Decentralized motion control

Decentralized Drive Technology MOVI-C® Field Controller
MOVI-C® FIELD CONTROLLER
MOVI-C® FIELD CONTROLLER

Based on the MOVI-C® modular automation system, a controller has also been developed for decentralized drive technology that has the same functions and interfaces as the MOVI-C® CONTROLLER, in this way extending the portfolio seamlessly and continuously.

The MOVI-C® FIELD CONTROLLER can be operated on almost all common industrial fieldbus systems (PROFINET, Ethernet/IP, Modbus TCP). As an EtherCAT®/SBusPLUS master, the MOVI-C® FIELD CONTROLLER controls drive axes in the "DSI" communication variant and other EtherCAT® stations.

Up to 16 drive axes can be controlled and the engineering work is reduced by optimized startup and diagnostics.

Martin Müller, Product Manager for the FIELD CONTROLLER

"Due to the ever-increasing complexity of systems, the MOVI-C® FIELD CONTROLLER offers the perfect complement to direct fieldbus control in drive engineering. With the help of the decentralized motion control system, the customer can achieve simple modularization with a high degree of networking to reduce complexity and fieldbus utilization. SEW-EURODRIVE enables the customer to operate the system easily, true to the motto: Parameterization instead of programming, while programming is still possible".

  • MOVI-C® FIELD CONTROLLER MOVI-C® FIELD CONTROLLER standard
  • MOVI-C® FIELD CONTROLLER MOVI-C® FIELD CONTROLLER advanced
Close table
Properties


  • Motion controller for simple motion tasks such as positioning or speed operation
  • can be connected to any standard control system
  • simple and central data storage
  • Routing from PROFIsafe to the axis modules
  • simple axis exchange function
  • FSoE Safety Routing
  • Web visualization

Technical data

  • number of axes:
  • CPU technology: DualCore ARM Cortex-A7, 1 GHz
  • Ethernet interface: 1
  • System bus: EtherCAT®/SBusPLUS master with integrated star distributor
  • Fieldbus slave: PROFINET slave, EtherNet/IPTM adapter
  • POPC UA: Server/Client
  • Memory: 512 MB SD card

We have stored a table for you here.
Close table
Properties




  • Motion controller for demanding motion tasks such as clock-synchronous axes with electronic gear or cam plate
  • can be connected to any standard control system
  • simple and central data storage
  • Routing from PROFIsafe to the axis modules
  • simple axis exchange function
  • FSoE Routing
  • Web visualization

Technical data

  • number of axes:
    • interpolated: 8
    • not interpolated: 8
  • CPU technology: DualCore ARM Cortex-A7, 1 GHz
  • Ethernet interfaces: 1
  • System bus: EtherCAT®/SBusPLUS master with integrated star distributor
  • Fieldbus slave: PROFINET slave, Ethernet/IPTM adapter
  • POPC UA: Server/Client
  • Memory: 512 MB SD card

We have stored a table for you here.

Software: Control technology

Our control software lets you automate any application.
Our control software lets you automate any application.
Our control software lets you automate any application.

Control a wide range of handling units and production machines using our controller software and various application modules. Choose between a program for easily configurable applications, or controller software for more complex, freely configurable motion sequences. Our portfolio is completed by additional program modules for highly demanding path interpolation.

  • MOVISUITE® engineering software MOVISUITE® engineering software
  • Startup with the MOVIRUN® software platform Startup with the MOVIRUN® software platform
  • Operation with MOVIKIT® software modules Operation with MOVIKIT® software modules

MOVISUITE® engineering software

Close table
The MOVISUITE® engineering software is a software that can be used for planning, startup, operation, and diagnostics. It reduces time and costs for the user while improving usability, even during the software engineering process.

  • End-to-end engineering for all components in the MOVI-C® modular automation system, from inverters to customer-specific drive technology
  • Rapid engineering thanks to unique usability and optimized workflows
  • User-friendly operation with a modern look and feel, and state-of-the-art GUI technology
  • Simple accessibility thanks to homogenized engineering interface


We have stored a table for you here.

Startup with the MOVIRUN® software platform

Close table
MOVIRUN® flexible – the flexible and open platform

  • Automation with MOVIC® and third-party components
  • Interpolated operating modes for demanding motion control applications
  • Modern programming system (IEC 61131)
  • Ready-to-use software modules from the MOVIKIT® modular software system can be integrated into the user program

We have stored a table for you here.

Operation with MOVIKIT® software modules

Close table
For simple drive functions up to demanding motion control functions

  • Graphical configuration and diagnostics
  • Available for MOVIDRIVE® technology and MOVIRUN® flexible for integration into the IEC program with user-friendly IEC interface

Modules

  • MOVIKIT® Velocity, Positioning
  • MOVIKIT® MultiMotion, MultiMotion Camming
  • MOVIKIT® MultiAxisController
  • MOVIKIT® Robotics


We have stored a table for you here.

Accessories and options / visualization

Accessories and options / visualization
The ideal accessories for every requirement.
The ideal accessories for every requirement.

Do you want install your controller in a control cabinet? Rather than integrating it into a drive electronics system? Do you require extended functionality? Or need to connect additional analog and digital interfaces?

We have the ideal supplementary options and accessories for you.

  • I/O expansions I/O expansions
  • Visualization / DOP operator panels Visualization / DOP operator panels

I/O expansions

I/O expansions
I/O expansions
I/O expansions
  • MOVI‑PLC® I/O system C
  • SNI I/O system

I/O expansions for automating your machine modules and entire systems.

Find out more

Visualization / DOP operator panels

Close table

  • Standardized, modern panel series with a touchscreen, high-resolution color display and wide viewing angle
  • Universal product range with screen sizes from 4.3" to 15.4"
  • Optimized on-screen keyboard makes it easier to enter text, even for smaller panels
  • Fast and powerful processors
    Large RAM for sufficient space to implement extensive visualization projects
  • Option to expand memory by means of an SD card or USB stick, e.g. for logging visualization data
  • Flexible communication connections due to sophisticated interfaces and protocol drivers
  • Durable monitors in 12.1" and 15.4" for extremely demanding visualization tasks in combination with the Windows-based platform MOVI-PLC® power. You have to activate runtime visualization in HMI-Builder.PRO with a USB dongle for this purpose.
  • Consistent appearance in both Windows-based and panel-based systems

We have stored a table for you here.
  • Panel-based visualization Panel-based visualization
  • Controller-based visualization

Standardized visualization and diagnostics

DOP11C operator panels perform comprehensive, complex visualization tasks
DOP11C operator panels perform comprehensive, complex visualization tasks
DOP11C operator panels perform comprehensive, complex visualization tasks

The more complex the system or machine and the more sophisticated the automation, the more system operators want sophisticated machine visualization. The ability to store the extensive data packages and parameter sets is also at the top of their wish lists.

Particularly for applications with large numbers of axes and many different degrees of freedom, it’s important to keep track of the whole system and provide a clear overview. The more and more extensive functionality of systems and drive technology means that the requirements for operation, visualization and diagnostics are also increasing.

Our standardized, modern operator panels of the DOP11C (drive operator panel) series are tailored for just these complex requirements with a high-resolution color display, fast processors and a large amount of RAM.

With these features, you can always reliably run a realistic visualization in real time and from any location, and implement simple operation and diagnostics of your system. The range of touchscreens extends from 4.3" to 15.4" with resolutions up to 1280 x 800 pixels.

Durable monitors combined with the MOVI-PLC® power Windows-based control platform are available for particularly demanding visualization tasks.

HMI-Builder.PRO operating software for perfect system integration

The HMI-Builder.PRO software is available for programming the DOP11C operator panel. Even in highly complex systems, this software provides a perfect interface between humans and machines (human-machine interface) and works according to the “What you see is what you get” concept.

It allows you to configure and test your programming and visualization tasks in advance. Thanks to the integrated simulation mode, you can do this without any additional hardware. And the software’s efficient program design minimizes your configuration work.

You can use numerous integrated HMI (human-machine interface) functions such as recipe management, alarm management, an integrated web server and much more. All in all, this operating software will increase your operational reliability and reduce your development costs.

  • Properties and technical data

Features

Close table

  • Standardized, modern panel series with a touchscreen, high-resolution color display and wide viewing angle
  • Universal product range with screen sizes from 4.3" to 15.4"
  • Optimized on-screen keyboard makes it easier to enter text, even for smaller panels
  • Fast and powerful processors
    Large RAM for sufficient space to implement extensive visualization projects
  • Option to expand memory by means of an SD card or USB stick, e.g. for logging visualization data
  • Flexible communication connections due to sophisticated interfaces and protocol drivers
  • Durable monitors in 12.1" and 15.4" for extremely demanding visualization tasks in combination with the Windows-based platform MOVI-PLC® power. To use this, you have to activate runtime visualization in HMI-Builder.PRO with a USB dongle.
  • Consistent appearance in both Windows-based and panel-based systems

We have stored a table for you here.
  • Technical data
  • HMI-Builder.PRO operating software
  • HMI-Builder operating software

Technical data

Close table
Device type Display Operation Interfaces Processor/memory
DOP11C-40

  • 4.3" TFT-LCD
  • 480 × 272 (16:9) pixels
  • 65k colors

Touch display panel
(resistive)
2xRS232, RS422/RS485
interface, Ethernet,
SD card slot, USB
ARM9 (400 MHz)

  • RAM: 128 MB (DDR2)
  • Application memory: 80 MB

DOP11C-51
Minimized costs thanks to optimized housing design

  • 5" TFT-LCD
  • 800 × 480 (16:9) pixels
  • 64k colors

Touch display panel
(resistive)
2xRS232, RS422/RS485
interface, Ethernet, SD card slot, USB
ARM9 (400 MHz)

  • RAM: 128 MB (DDR2)
  • Application memory: 200MB

DOP11C-70

  • 7" TFT-LCD
  • 800 × 480 (16:9) pixels
  • 65k colors

Touch display panel
(resistive)
RS232, RS422/RS485
interface, Ethernet,
SD card slot, USB
ARM9 (400 MHz)

  • RAM: 128 MB (DDR2)
  • Application memory: 80 MB

DOP11C-100

  • 10.4" TFT-LCD
  • 640 × 480 (4:3) pixels
  • 65k colors

Touch display panel
(resistive)
RS232, RS422/RS485
interface, Ethernet,
SD card slot, USB
ARM9 (400 MHz)

  • RAM: 128 MB (DDR2)
  • Application memory: 80MB

DOP11C-120

  • 12.1" TFT-LCD
  • 1280 × 800 (16:10) pixels
  • 262k colors

Touch display panel
(resistive)
RS232, RS422/RS485
2xinterface, Ethernet,
SD card slot, USB
Intel Atom (1.1 GHz)

  • RAM: 1 GB (DDR2)
  • Application memory: >= 1.4 GB

DOP11C-150

  • 15.4" TFT-LCD
  • 1280 × 800 (16:10) pixels
  • 262k colors

Touch display panel
(resistive)
RS232, RS422/RS485
2xinterface, Ethernet,
SD card slot, USB
Intel Atom (1.1 GHz)

  • RAM: 1 GB (DDR2)
  • Application memory: >= 1.4 GB

DOP11B-M70

  • 6.5“
  • 640 × 480 pixels (64k colors)

  • Touch screen and membrane keypad
  • IP 65
  • 8 function keys

RS232, Ethernet 10/100 Mbit, USB 12 MB
Device type monitor
(MOVI-PLC® power)
OPT71C-120

  • 12.1" display
  • 1280 × 800 (16:10) pixels
  • 16 million colors

Touch display monitor in connection with MOVI‑PLC® power DVI,
USB interface for
touch functionality
 
OPT71C-150

  • 15.4" display
  • 1280 × 800 (16:10) pixels
  • 16 million colors

Touch display monitor in connection with MOVI‑PLC® power DVI,
USB interface for
touch functionality
 
Device type license
(MOVI-PLC® power)
ORV71C USB license dongle for using the visualization runtime integrated in HMI-Builder.PRO without a time limit
We have stored a table for you here.

HMI-Builder.PRO operating software

Close table

  • Optimal interaction between visualization and our control technology
  • Perfect system integration as an integral part of MOVITOOLS® MotionStudio
  • Consistent development environment for the entire C series (from the small 4.3" panel through to high-end 15.4" visualization supported by MOVI‑PLC® power)
  • Minimal configuration work thanks to modern, efficient program design
  • Numerous integrated HMI functions such as recipe management, alarm management, an integrated web server and much more increase operational reliability and reduce development costs
  • Open scripting function in C# that offers the full flexibility of the .NET Framework architecture for complex visualization tasks
  • Integrated simulation mode allows you to configure and test visualization tasks in advance – even without hardware

We have stored a table for you here.

HMI-Builder operating software

Close table
The mobile DOP11B-M70 operator panels are programmed using the HMI-Builder software. This software provides an interface between humans and machines (human-machine interface) and works according to the “What you see is what you get” concept. This way, you can already see during programming how the visualization will look for your system operator later.
HMI-Builder provides an object library with a large selection of static and dynamic objects. These objects are represented by simple and illustrative symbols. Just select the objects and edit them. The result is your custom screen view.
HMI-Builder operating software for intuitive human-machine interaction:

  • Programming the operator panels
  • “What you see is what you get” software concept
  • Display of the operator visualization even during programming
  • Extensive object library with a large selection of static and dynamic objects
  • Objects are displayed using simple, clear icons for the custom screen view

We have stored a table for you here.

High-end motion control and visualization with MOVI-PLC®

Controller-based visualization with the IPC controller MOVI-PLC® power
Controller-based visualization with the IPC controller MOVI-PLC® power
Controller-based visualization with the IPC controller MOVI-PLC® power

As an operator of highly complex systems, you face the challenge of ensuring that demanding technology functions run with multiple degrees of freedom. The ability to do this via a centralized controller with a reduced number of interfaces would allow you achieve significant gains in terms efficiency and productivity.

With the programmable motion and logic controller MOVI-PLC® power compatible with IEC-61131-3, we offer just the solution you need. It ensures optimum implementation of centrally processed high-end motion and logic control applications. This controller is specifically designed for motion functions such as cams and 3D robot functions with up to eight degrees of freedom

Real-time operating system with high processing power in 1 ms cycles

The integrated Intel Core2Duo microprocessor provides exceptionally high processing power and extremely short response times. It also features an SBUSPLUS system bus (on-board EtherCAT) for the synchronous transfer of processing power to the drives. This enables your entire drive train with up to 32 motion and logic control axes to be processed in just one millisecond.

It also comes with an integrated CFast memory card for firmware, applications, and operational data. The replacement of units is easier while maintaining exceptionally fast data access.

  • Properties and technical data

Visualize directly on MOVI-PLC® power

  • Available in versions T0 – T25
  • Reduced interfaces, meaning all functions are controlled by the controller
  • Demanding technology functions such as cams or electronic gear unit
  • 3D robotics functions with up to 8 degrees of freedom
  • Simple high-performance implementation of most complex machines
  • Up to 32 centrally calculated motion control axes in one millisecond
  • There is sufficient processing power available even for the most demanding application programs
  • Fast, synchronized SBUSPLUS for coordinating drives
  • A CFast memory card for firmware, application and user data facilitates unit replacement and enables extremely quick data access
  • Technical data
  • Windows operating system
  • HMI Builder.PRO runtime

Technical data

Close table

  • Intel Core2Duo 2.2 GHz processor
  • 1 × GB Ethernet (10/100 BaseT) for engineering tasks or TCP/IP and UDP via IEC 61131-3
  • 1x Ethernet interface for SBUSPLUS
  • 16 MB program memory + 64 MB data memory
  • 32 kB retain variables + 24 kB system variables (retain)
  • Free-running tasks and 8 cyclical tasks (1 to 10 000 ms)
  • PC-readable memory card for firmware and application program
  • CAN interface as an option OSC71B

We have stored a table for you here.

Extend your system with Windows Embedded Standard 7

Close table
To extend your system with Windows Embedded Standard 7, simply install a second CFast memory card. This will transform your MOVI-PLC® power into a high-performance automation controller that combines high-end motion control with logic control and visualization capabilities, all in one system.
The optional Windows operating system allows intuitive 3D simulation as well as smooth processing of motion sequences. Various USB interfaces allow the connection of peripheral devices such as keyboards, pointing devices, and printers. There is also a DVI interface provided for connecting an external monitor. With the OPT71C generation of operator panels, you have exactly the right extension for your motion controller. When used in conjunction with HMI-Builder.PRO and its wide variety of functions for creating human-machine interfaces, you can increase operational reliability and lower development costs.
Do you need to install other programs while your system is running? Are you having to contend with Windows blue screens? No need to worry, this has no impact on machine control. Thanks to the new hypervisor technology, Windows 7 does not have any effect on the real-time behavior of the real-time operating system.

  • Controller-based visualization solutions available with the MOVI-PLC® power
  • Benefit from standard Windows functionality thanks to a second Windows operating system on the MOVI-PLC® power
  • Panel-based visualization solutions with the industry-standard OPT71C monitor
  • Central storage and management of data
  • Central data storage
    Engineering
  • Condition monitoring
  • Operational data collection

We have stored a table for you here.

Controller-based visualization

Close table

  • For implementing visualization solutions on the Windows operating system of MOVI-PLC® power
  • Output medium: 12-inch or 15-inch industry-standard OPT71B monitor
  • Connection via DVI or USB (touchscreen)

We have stored a table for you here.

Parameterization instead of programming

MOVI-C® CONTROLLER power
MOVI-C® CONTROLLER power
MOVI-C® CONTROLLER power

The modular MOVI-C® automation system provides a common platform for control cabinet controllers and decentralized controllers with the same functionalities and the same variety of interfaces.

The controllers from the MOVI-C® automation modular system can be used for a wide range of motion control or automation tasks and are connected to the higher-level controller of a machine cell or system via fieldbus slave interfaces for the PROFINET, EtherNet/IPTM or Modbus TCP fieldbus systems. As an EtherCAT®/SBusPLUS master, the controller ensures smooth communication with subordinate units, such as MOVIDRIVE® or MOVIGEAR® performance, and their clock-synchronous connection to the motion/application.

However, the integrated software of the centralized and decentralized controllers offers the decisive added value for reducing complexity: parameterization instead of programming. For you as a user, this software means more scope for parameterization and less programming effort.

The simple central data storage and the auto-reload function for exchange are further advantages of our control technology, thus keeping the reliability and availability of automation technology in your production constantly at a very high level.

Cut complexity

The MOVI-C® CONTROLLER provides added flexibility for parameterization and reduces programming outlay. It's all thanks to the ready-standardized MOVIKIT® modules and MOVIRUN® software platform – and the end results are lower costs and less complexity. The control technology is available in four different performance classes – power, progressive, advanced and standard. You also benefit from simple data storage and an auto-reload function for axis replacement. MOVI-C® CONTROLLER units can be connected to all standard control systems.

Enjoy more flexibility

Our control technology and software also give you the option of writing your own programming. Would you prefer to create your own bespoke programs for your application, such as PLC functions or specific rules, so you can stand out from your competitors? If so, then our software platform has exactly what you need.

MOVI-C® = Complete automation from a single source

  • Provided by an automation expert
  • All phases from planning and startup to operation, diagnostics and service
  • All components from software and controllers to inverters and drive technology

Your benefits

  • Save time and cut costs

    Thanks to less programming work and greater freedom in terms of parameterization
  • Reduce complexity

    Thanks to ready-to-use, standardized software modules for a range of applications
  • Control up to 32 interpolated axes

    Even challenging motion kinematics can be parameterized quickly and easily

Properties

Properties

  • The performance classes of the MOVI-C® CONTROLLERS are planned according to the number of connected MOVI-C® inverters for synchronous axes and auxiliary axes
  • Facilitates the startup of systems with multiple drives: synchronized operating modes, applicative drive groups
  • Referencing, limit switch processing, error processing and error response
  • Simple and centralized data storage
  • Can be connected to any conventional control system
  • Powerful and user friendly
  • Auto-reload function for axis replacement
  • Startup: MOVIRUN® software platform modules for parameterization or programming
  • Operation: MOVIKIT® modular software system with function blocks for simple speed control, positioning, robotics, electronic cam, mechanically coupled axes, etc.
  • PROFIsafe routing to the axis modules
  • 1 × ETHERNET (10/100 BaseT) for engineering access or for communication via TCP/IP and UDP via IEC 61131-3
  • EtherCAT®/SBusPLUS master
  • Third-party devices with EtherCAT® interfaces can be easily connected to the MOVI-C® CONTROLLER units

Technical data

MOVI-C® CONTROLLER power performance class

Control of 32/32 axes

  • PROFINET slave, Ethernet/IPTM slave, Modbus TCP/IP slave
  • 7× USB 2.0
  • 2 GB CFast memory card
  • ≤ 32 interpolating axes
  • ≤ 32 auxiliary axes
  • A second operating system, Windows embedded 7, can be optionally connected via state-of-the-art Hypervisor technology, e.g. for integrated visualization
  • PC based


MOVI-C® CONTROLLER progressive performance class

Control of 16/16 axes

  • PROFINET slave, Ethernet/IPTM slave, Modbus TCP/IP slave
  • 2 GB CFast memory card
  • ≤ 16 interpolating axes
  • ≤ 16 auxiliary axes
  • PC based

MOVI-C® CONTROLLER advanced performance class

  • 2x CAN, 1 of which is electrically isolated
  • 1x RS485
  • PROFINET slave, Ethernet/IPTM slave, Modbus TCP/IP slave
  • Status display for PLC and fieldbus
  • Optional: Installation in a master module, can be added to MOVIDRIVE® modular
  • SD memory card
  • ≤ 8 interpolating axes
  • ≤ 8 auxiliary axes

MOVIC® CONTROLLER standard performance class

  • 1x CAN, non-isolated
  • PROFINET slave, Ethernet/IPTM slave, Modbus TCP/IP slave
  • Status display for PLC and fieldbus
  • SD memory card
  • ≤ 2 interpolated axes
  • ≤ 6 auxiliary axes

Accessories and options for MOVI-C® CONTROLLER

Startup with MOVIRUN® software platform


MOVIRUN® flexible – the flexible and open platform:

  • Automation with MOVI-C® and third-party components
  • Interpolated operating modes for demanding motion control applications
  • Modern programming system (IEC 61131)
  • Ready-to-use software modules from the MOVIKIT® modular software system can be integrated into the user program


Operation with MOVIKIT® software modules


For simple drive functions up to demanding motion control functions

  • Graphical configuration and diagnostics
  • Available for MOVIDRIVE® technology and MOVIRUN® flexible for integration into the IEC program with user-friendly IEC interface


Modules:

  • MOVIKIT® Velocity, Positioning
  • MOVIKIT® MultiMotion, MultiMotion Camming
  • MOVIKIT® MultiAxisController
  • MOVIKIT® Robotics
  • and many more


Software

Both software product ranges, for startup and for operation, feature a wide range of powerful functions and an intuitive user interface. And they let the user choose between parameterization or programming.


The advantages of parameterization over programming:

  • Shorter startup times through the use of standardized software modules
  • You only have to enter the parameters needed for the application
  • User-friendly application programs guide you through the process of setting parameters, so there is no need for complicated programming
  • No lengthy training or familiarization, which means quick project planning and startup


Contact

Please enter your postal code to find the corresponding contact person.

MOVI-C® live
More informations: www.sew-eurodrive.de
gingerbread packaging machine

The video is loading...

More informations: www.sew-eurodrive.de

Automated packing with MOVI-C®

Application example for multipackers and toploaders

The new MOVI-C® automation series represents the future of automation. The modular system is made up of four modules.
MOVI-C®: A comprehensive modular automation system

The video is loading...

The new MOVI-C® automation series represents the future of automation. The modular system is made up of four modules.

See MOVI-C® in action for yourself

Visit us at the HANNOVER MESSE

Lebkuchenproduktion mit dem modularem Automatisierungsbaukasten MOVI-C®
Lebkuchenproduktion mit MOVI-C®

The video is loading...

Lebkuchenproduktion mit dem modularem Automatisierungsbaukasten MOVI-C®

MOVI-C® moves

Gingerbread production runs full steam ahead with MOVI-C®

Last visited