Cold rolling and strip processing lines

Cold rolling and strip processing lines help to optimize the surface quality of steel strip products. Since the steel is not heated prior to processing – as is the case in hot rolling – only more modest material reduction can be achieved.

Drive technology for the steel industryT

Coil handling with process crane
Coiling and decoiling steel strips
Correct tensioning using bridle rolls
Strip storage for non-stop operations
Cold rolling steel strips
Quality optimization using leveling machines

Coil handling with process crane

Cranes are in use all over steelworks. The demands on the drive technology for the hoist and travel units on process crane in this setting are extreme and include loads amounting to several dozen metric tons, high torques, and rapid handling speeds. The cranes must be ready for service around the clock. For example, if the cold rolling system requires primary material, no interruptions can be tolerated.

Coiling and decoiling steel strips

Coiling systems are to be found at the beginning and end of every strip processing line. During the coiling and decoiling the drives run at constantly changing torques from low to high speed.

Correct tensioning using bridle rolls

It is crucially important that the tension of the steel strip is maintained at several points in the strip treatment line. Bridle rolls take care of this important task, and have very different torque requirements, depending on where they are positioned along the strip.

Strip storage for non-stop operations

Continuous operation is only possible on a strip processing line when the input and output strip storage systems work reliably. At the start of the strip processing line, the strip storage systems bridge the time for loading new coils and welding, and at the end of the line, the time for cutting and removing the finished coils. Without properly functioning strip storage systems, productivity would drop drastically. The correct drives ensure non-stop production.

Cold rolling steel strips

Cold rolling systems ensure system manufacturers receive exactly the correct primary material for their mechanical engineering projects. Cold rolling mill are used either in combination with a strip processing line – such as a finishing rolling mill in a galvanization system or tandem rolling mill systems in a pickling system – or separately in a reversing cold rolling mill plant or Sendzimir roller plant. SEW-EURODRIVE ensures that you, the system manufacturer or operator of cold rolling systems, receive the perfect drive technology for reducing thickness.

Quality optimization using leveling machines

Leveling machines shape the strip with precision. This maximizes the quality of the strip and minimizes problems caused by coil set, edge waves, cross buckling, and coil curving. And since it comes down to every hundredth of a millimeter in the workpieces, SEW-EURODRIVE offers customized solutions for leveling systems that prevent the need for complex finishing.

In this case, a properly designed drive ensures

Minimal investment costs due to comparison of different drive layouts

Reliable torque transmission to differently loaded output shafts

Teamwork –machine builders and SEW-EURODRIVE

We aim to make your project successful and offer you:

Our expertise and resources – you achieve a level of quality that sets you apart from the competition.

High-tech solutions that minimize the particular risks in your project.

The best delivery times on the market – we save you money and increase your flexibility.

A comprehensive portfolio of solutions – with SEW-EURODRIVE, you will quickly find the right solution without time-consuming research or development work.